< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=1367055820384037&ev=PageView&noscript=1" />
All Categories
EN

Embeded SC Quick Connector

Home>Product>FTTH Series>Embeded SC Quick Connector > Product detail

  • https://www.qdapt.com/upload/product/1600657197208490.png
  • https://www.qdapt.com/upload/product/1600394622980558.jpg
  • https://www.qdapt.com/upload/product/1600394622818988.jpg

Embedded SC fiber quick connector


Inquiry
  • Quick Details
  • Advantage
  • Partner
  • Application
  • FAQ
  • Inquiry
Quick Details

Fiber optic connector, commonly known as a fiber optic connector, is commonly referred to as a fiber optic connector. It is a reusable passive device used to connect two fibers or cables to form a continuous optical path. It has been widely used in fiber transmission lines and fiber distribution frames. And optical fiber test instruments and meters are the most used optical passive components.

Product Selling Point

1. Optical performance: For the optical performance requirements of fiber optic connectors, the two most basic parameters of insertion loss and return loss are mainly used.
Insertion Loss is the loss of the effective optical power of the link caused by the introduction of the connector. The smaller the insertion loss, the better. Generally, the requirement should be no more than 0.5dB.Return Loss (Reflection Loss) refers to the ability of the connector to suppress the reflection of the link optical power, and its typical value should be no less than 25dB. In the actual application of the connector, the surface of the pin has been specially polished to make the return loss larger, generally not less than 45dB.

2. Interchangeability, repeatability
The fiber optic connector is a universal passive device. For the same type of fiber optic connector, it can be used in any combination and can be used repeatedly. Therefore, the additional loss introduced is generally less than 0.2 dB.

3. Tensile strength
For a good fiber optic connector, the tensile strength is generally required to be no less than 90N.

Partner
  • undefined

  • undefined

  • undefined

  • undefined

Application Scenario

1) Metro/Access Communication Networks

2) Fiber Optic Instruments

3) CATV System

4) Optical Signal Distribution

FAQ

Q1. Can I have a sample order for this product?

A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.


Q2. What about the lead time?

A:Sample needs 1-2 days, mass production time needs 1-2 weeks.


Q3. How do you ship the goods and how long does it take to arrive?

A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.


Q4: Do you offer guarantee for the products?

A: Yes, we offer 1-2 years warranty to our formal products.


Q5: What about delivery time??

A: 1) Samples: within one week. 2) Goods: 15-20 days usually.

Contact Us