All Categories

EN

BLOG

What Are the Specifications for Fiber Optic Patch Cable Wiring?

March 16,2022

When the server room is placed in multiple cabinets and no 0DF special cabinet, a cabinet should be designated as a special cabinet for ODF, this cabinet cannot be installed, placed and ODF terminal box of any equipment. ODF terminal box is only allowed to be installed in the designated ODF special cabinet.

When laying fiber optic patch cable, fiber optic patch cable should start from the optical conversion card fiber port in the frame and extend downward, from the fiber optic patch cable wiring special cable manager on the top side of the splitting slot into the fiber optic patch cable special cable manager (Note: for the frame for fiber optic patch cable layout, the frame should be the first slot from left to right in the optical conversion card fiber optic patch cable into the cable manager from left to right in the first splitting slot. The frame from left to right of the second slot in the optical conversion card fiber patch cable into the cable manager from the left to the right side of the second split slot and so on) and then from the fiber patch cable wiring special cable manager back side of the slot through the wiring in the front of the cabinet near the ODF special cabinet side, and along the front of the cabinet near the ODF special cabinet side upward (Note: If the front of the cabinet on both sides with cable management slot, it should be Fiber optic patch cable wiring in the front of the cabinet near the ODF special cabinet side of the cable groove). Through the same side of the top of the cabinet wiring holes, from the top of the cabinet wiring holes, if the room has a bridge,fiber optic patch cable should be worn from the top of the cabinet into the upper bridge, and wiring on the bridge to the left or right to the top of the ODF special cabinet, and then from the bridge through the downward extension, from the top of the ODF special cabinet If the room does not have a bridge, the fiber optic patch cable should be wired along the top of the cabinet to the left or right to the left wiring hole at the top of the ODF cabinet, and then from the left wiring hole at the top of the ODF cabinet into the ODF cabinet, followed by wiring from the left side of the ODF cabinet to the ODF terminal box splitter (Note: If the front of the cabinet on both sides If the front of the cabinet is equipped with cable management slot, the fiber patch cable should be wired in the cable management slot on the left side of the front of the cabinet), and then into the corresponding ODF terminal box terminal tray. If there is redundancy in the length of the fiber optic patch cable. The redundant part will be combed and arranged in the ODF special cabinet.

The wiring of the server room should not be arbitrary.

The network cable should be the actual wiring in the field, when the new or renovation of the server room, the network cable, fiber optic patch cable is not allowed to use the same cable manager or cabinet cable slot, should be respectively in their own special cable manager or cabinet cable slot for wiring, and equipment power lines and network cable, fiber optic patch cable is not allowed to wind each other, should be separate from the network cable, fiber optic patch cable bundle.