EN 
ES
AR
KO
PT
RU
FR
- Snabbinformation
- Fördel
- partner
- Ansökan
- FAQ
- Förfrågan
Snabbinformation
optical splice closures are used to distribute, splice, and store the outdoor optical cables which enter and exit from the ends of the closure. There are two connection ways: direct connection and splitting connection. They are applicable to situations such as overhead, manwell of pipeline, embedded situation etc. Comparing with terminal box, the closure requires much stricter requirement of seal. Sealing ring and air valve are required for closure, but that are not necessary for terminal box.
| Mått och kapacitet | |
| Dimensions (D*H) | 470mm * 205mm |
| Max kapacitet | 288 Core |
Antal kabelingång/utgångar | 2.6 |
| Kabelns diameter | S6 small round ports(21mm) and 1 large oval port(65mm) |
| Driftsvillkor | |
| Temperatur | -40 ℃ ~ + 60 ℃ |
| Luftfuktighet | ≤95 % (vid 40 ℃) |
| Lufttryck | 70kPa ~ 106kPa |
Produktförsäljningspunkt
1. The closure casing is made of quality engineering plastics, and of goodperformance of anti-erosion against acid and alkali salt, anti-aging, as wellas smooth appearance and reliable mechanical structure.
2.The mechanical structure is reliable and has the performance of resistingwild environment and intensive climate changes and serious workingenvironment. The protection grade reaches IP68.
3.The closures are applicable to ribbon type optical cable and commonoptical cable.
4.The splice trays inside the closure are turn-able like booklets, and haveadequate curvature radius and space for winding optical fiber to make surethe curvature radius for optical winding 40mm.Each optical cable and fibercan be operated individually
5.The closure is of small volume, big capacity and convenient maintenance.The elastic rubber seal rings inside the closure are of good sealing and sweat-proof performance.
6.The casing can be opened repeatedly without air leakage. No special toolsare required. The operation is easy and simple. The air valve is provided forthe closure and used to check the sealing performance.
partner
Applikationsscenario
1)Fiber till husprojektet
2)Kabelnät-TV
3)Passivt optiskt nätverkssystem
4)stadsnät
5) Andra spektroskopiska system
FAQ
Q1. Kan jag få en provorder för den här produkten?
A: Ja, vi välkomnar provorder för att testa och kontrollera kvalitet. Blandade prover är acceptabla.
Q2. Vad sägs om ledtiden?
A: Provet behöver 1-2 dagar, massproduktionstiden behöver 1-2 veckor.
Q3. Hur skickar du varan och hur lång tid tar det för att komma fram?
A: Vi skickar vanligen via DHL, UPS, FedEx eller TNT. Det tar vanligtvis 3-5 dagar att anlända. Flygbolag och sjöfart också valfritt.
Q4: Erbjuder du garanti för produkterna?
S: Ja, vi erbjuder 1-2 års garanti för våra formella produkter.
F5: Vad sägs om leveranstid ??
A: 1) Prover: inom en vecka. 2) Varor: 15-20 dagar vanligtvis.
